MTG-FB | Fixed Bottom Probe

•  Part No.: MTG-FB Series
•  Input Voltage: 16 - 31 VDC
•  Overall Probe Length: 209” to 860”
•  Enclosure Rating: PVDF, IP 68
•  Typical Level Resolution: 0.010”
•  Linearity - +/- 0.01% of Full Scale
        +/- 0.010”, whichever is greater
•  Repeatability: +/- 0.001% of Full Scale
        +/- 0.00025”, whichever is greater
•  Temperature Measurement: Up to 5 along the sensor span
•  Temperature Accuracy: +/- 2 °F
•  Typical Temperature Resolution: +/- 0.01 °F
•  Temperature Sensing Range: -40 °F to +158 °F or -40 °C to 70 °C
•  Operating Temperature Range: -40 °F to +158 °F or -40 °C to 70 °C
•  Probe Output: Pulse Position Modulation
•  Distance to Monitor: 1000’ using Belden 8761
•  Compatible Controllers: 0EL8000II PROTEUS Series: 0EL8000III-B, 0EL8000III-K, 0EL8000III-X
•  Floats: BNF-1-4 4” Buna Product Float
      BNF-1-2 2” Buna Product Float
      SSF-1-4 4” Stainless Steel Product Float
      SSF-1-2 2” Stainless Steel Product Float
      SSF-1-2W-VB 2” Stainless Steel Water Float for low water detection applications (used with W6-VBH weight)
      SSF-1-2-VB 2” Stainless Steel Product Float for low product detection applications (used with W6-VBH weight) Specs based on       4” buna
•  Weight: W6-VBH 5.75” (dia) x 7” (h) Stainless Steel Weight for use in low water or product applications when used in conjunction with       floats SSF-1-2W-VB and SSF-1-2-VB. Requires a 6” accessible opening on tank top.
•  Spacer: SFS Stainless Steel Float Spacer required on probe lengths 288” or greater
•  Listings: UL, intrinsically safe when used in accordance with 0EL8000II/0EL8000III control drawing

•  Compensate for roof movement
•  Unparalleled inventory accuracy
•  Accurate temperature compensation
•  Measure as low as 1” of water off tank bottom

•  MTG-FB-R5-XXX (where “XXX” is the overall probe length in inches, from 209" to 860") is a flexible PVDF magnetostrictive tank inventory management probe which enables very accurate product level and measurement of as little as 1" (25mm) of water in the bottom of tanks.
•  It also provides five temperature measurements spaced evenly 1m from the tank floor.
•  The MTG-FB-R5-XXX benefits from a bottom reference approach by resting a heavy hollow weight on the bottom of each tank.
•  This unique OMNTEC bottom reference design takes full advantage of the tank bottom stability versus known instabilities of a tank roof.
•  The tank bottom reference design is further enhanced by a top mounted constant-tension feature.