PROTEUS-W | Wireless Automatic Tank Gauge

•  Input Power: 100-240 VAC +/- 10% 50/60 Hz 60 watts
•  Voltage to Probes: 28 VDC
•  Display: Color 7-inch graphic display with capacitive touch screen
•  Audible alarm: 85 dB piezoelectric horn
•   Printer: 36-character thermal
•  System status: 3 LED’s (Power, Warning, Alarm)
•  Relay Outputs: 5 standard, 6A - 30 VDC / 250 VAC RES
•  Low-voltage Outputs: 12 VDC @ 225 mA
•  Operating Temperature: 20 to 140° F (-7° to 60° C)
•  Standard Communications: TCP/IP | RS-485 | RS-232
•  Models Available: OEL8000IIIX-5-W | OEL8000IIIXP-5-W (with printer)
•  Optional Features: Modbus RTU and TCP | Tank Active™ App
•  Compatible Sensors: FillCheck Series Continuous Overfill Protection Sensors | BX Series Sensors
•  BX-Series Sensor Cable: OMNTEC EC-4 - 4 conductor 22 AWG shielded twisted pair cable with drain or equivalent. Maximum length               2,000 feet (610m).
•  Compatible Probes: MDS DataStick Series Wireless Probes | MTG Series Wired Probes
             Wireless        Wired
             MDS-RS Series    MTG-RS Series      Rigid Probe
             MDS-FL Series    MTG-FL Series      Fixed Top Probe
             MDS-FB Series    MTG-FB Series      Flexible Fixed Bottom Probe
• MTG Probe Cable: OMNTEC EC-2 (Belden 8761) - 2 conductor 22 AWG shielded twisted pair cable with drain. Low Inductance: equal or            less than 0.2 microhenries per foot. Maximum length 1,000 feet (305m). Consult factory for longer wire runs.
•  Accessories - DC-RX-SR-O-S3 DataCheck receiver
        DC-RP-12-S3 DataCheck repeater
        MMRD7 Series Mini-Me remote display
        RAS Series Remote annunciators
        PS-103 Thermal printer
        DPU-6PK Thermal paper
        XB-416DC 4 DataStik probe and 16 FillCheck sensor module
        XB-800DC 4-8 DataStik probe module
        X232-420 External RS-232 to 4-20 mA converter
        MB-232/485 Configurable RS-232 or RS-485 option board
        C232-BAC RS-232 BACnet TCP/IP converter
        C485-BAC RS-485 BACnet TCP/IP converter
•  Enclosure Type: UL Type 1
•  Weight: 18 lbs. (8.16 kg)
•  Dimensions: (h) 10.0” (w) 15.2” (d) 8.2”
•  Approvals: UL-listed, CUL-listed, ATEX, IECEx

•  Accepts up to a combination of 44 MDS DataStik or MTG magnetostrictive probes
•  Accepts up to a combination of 64 FillCheck or BX sensors
•  Color 7-inch graphic display with capacitive touch screen
•  Large user-friendly icons
•  Easy to read leak and level alarms
•  Built in web server
•  Built in VPN capability
•  Flash based non-volatile memory for program storage (does not require a battery)
•  1 RS-232 port
•  Up to 2 configurable RS-232/RS-485 ports (1 standard, 1 optional)
•  Ethernet / TCP/IP standard
•  E-mail / Text capability standard
•  Thermal printer option or network printing capable
•  Up to 5 built in programmable relays
•  Up to 32 additional dry contact relays
•  SD memory card slot for system backup and historical reports
•  MODBUS RTU & TCP upgradeable
•  Remote display option
•  Compatible with Tank Active™ remote tank inventory monitoring app
•  Remote software update capable

•  Experience a new era of tank gauging and leak detection with the DataCheck for PROTEUS ATG system.
•  The system stores high-resolution tank charts and uses the integral API Volumetric Correction methodology to calculate NSV (Net Standard Volume).
•  Our patented ISBPW (intrinsically-safe, battery-powered, wireless) tank monitoring system, DataCheck, has been in service since 1999, providing high-accuracy inventory measurement and redundant overfill protection.
•  The expandable Proteus-W can also support our hardwired MTG-Series tank inventory probes and networked BX-Series sensors simultaneously.
•  Embrace a brighter future in tank gauging and leak detection with the DataCheck for PROTEUS ATG system.